Portable Tool Transformer - CM5000/210/PT
Description
- Manufactured to BSEN 61558
- Thermal overload protection
- Glass reinforced polyester (GRP) case providing ingress protection to IP44
- Output sockets to BSEN 60309 / IEC 60309 (Previously BS4343)
- 2 metre input mains lead with bare ends, for hardwiring or connector of choice (max current 23A)
i) If using the transformer up to it's 2.5kVA continuous rating, supply current needed is 12A. Therefore fitting a 13A UK domestic plug is permissible, alternatively 16A industrial plug.
ii) If using the transformer up to it's 5.0kVA intermittent rating, supply current needed is 23A. Recommend 32A size industrial plug (or other suitably rated plug), alternatively hard-wire direct to a fused spur electrical point.
Specifications
- Weight (kg): 32
- Height (mm): 280
- Depth (mm): 355
- Width (mm): 315
- Unit Drawing pdf: 6120 Rev2 CM50003.pdf
- Intermittent Tool Rating: 5.0kVA
- Continuous Rating: 2.5kVA
- Input Voltage: 230V
- Output Voltages: 110V Centre tap earthed (55V-0-55V)
- Output Sockets: 2 No. 16A, 1 No. 32A Industrial
